Ship O´Hoi
Sailing knots: the 9 boat knots you actually need, step by step

Sailing knots: the 9 boat knots you actually need, step by step

Håkon
, Co-founder

You don't need fifty knots to handle a boat. Nine cover almost everything on a day boat or a charter yacht: tying up, putting fenders out, using a cleat, joining two ropes and securing the anchor. Here is what each is for and how to tie it, with mooring at the end, so you are ready for your first day on a rental boat.

The 9 knots at a glance

KnotWhat it is for on boardGood to know
BowlineFixed loop over a bollard, post or ringWon't slip or jam, easy to untie
Cleat hitchEvery line on the boat's cleatsFigure of eight plus a locking turn
Clove hitchFenders on the guardrail, quick ties to a postCan slip if the load keeps changing
Round turn and two half hitchesMooring line to a ring or postCan be untied under load
Figure-of-eight knotStopper at the end of a lineKeeps sheets and anchor lines from running out
Sheet bendJoining two ropes, even of different sizesThe right knot for joining lines
Double sheet bendJoining slippery or very different ropesOne extra turn for more grip
Anchor bendAnchor line to the anchor's ring or shackleHolds when the line jerks in a swell
Reef knotTying round a sail, a bag or a bundleNever use it to join two load-bearing lines

The 9 knots, step by step

1. Bowline

The bowline is the most useful sailing knot. It makes a fixed loop that neither slips nor tightens, and it still unties easily after taking a load.

Use it for: a loop at the end of a mooring line to drop over a bollard or post. It is also the loop you put round someone's chest to help them back on board.

How to tie it:

  1. Make a small loop in the standing part of the line, with the working end lying on top.
  2. Pass the end up through the loop from underneath.
  3. Take it round behind the standing part.
  4. Bring it back down through the small loop, the same way it came up.
  5. Hold the end and the loop together and pull the standing part to set the knot.

The old memory aid: the rabbit comes out of the hole, runs round the tree and goes back down the hole.

2. Cleat hitch

The knot you will use most. Done properly it holds well and comes off in a second.

Use it for: every mooring line that is made fast on a cleat.

How to tie it:

  1. Lead the line to the horn furthest from the load and take one full turn round the base of the cleat.
  2. Cross over the top and take the line round the other horn, making a figure of eight. Repeat once.
  3. Finish with a locking hitch: twist a loop so the line lies parallel to the figure of eight, and drop it over the horn.

More turns only make the line harder to free when you cast off.

3. Clove hitch

Two turns round a post or a rail. Quick to tie and undo, but it can work loose when the pull keeps changing direction, so don't trust it alone as an overnight mooring.

Use it for: hanging fenders from the guardrail and short, temporary ties to a post.

How to tie it:

  1. Take the line once round the rail or post.
  2. Cross over the standing part and take a second turn in the same direction.
  3. Tuck the end under the second turn so it comes out beside the standing part, pointing the other way.
  4. Pull tight. If the fender will hang for a long time, add a half hitch to lock it.

4. Round turn and two half hitches

The most secure way to tie a line to a ring or post for a long stay. The round turn takes the strain and the half hitches hold it.

Use it for: mooring to a ring on a quay or a post, especially when it is windy. It can be untied even with the line under load.

How to tie it:

  1. Take the line twice round the ring or post.
  2. Tie a half hitch round the standing part.
  3. Tie a second half hitch in the same direction, and pull tight.

5. Figure-of-eight knot

A stopper knot that keeps a line from running out through a fairlead or block.

Use it for: the ends of the sheets on a sailing boat and the bitter end of the anchor line, so it doesn't disappear over the side.

How to tie it:

  1. Make a loop a short way from the end.
  2. Take the end round behind the standing part.
  3. Pass it down through the loop from the front, so the knot looks like an 8.
  4. Pull tight.

6. Sheet bend

The sheet bend joins two ropes, and it holds even when they are different thicknesses.

Use it for: extending a mooring line that is too short, or tying a thin line to a thick rope.

How to tie it:

  1. Make a bight (a U-shaped bend) in the thicker rope.
  2. Pass the end of the thinner rope up through the bight from underneath.
  3. Take it round behind both parts of the bight.
  4. Tuck it under itself, but not under the bight. Both loose ends should finish on the same side.
  5. Pull it tight before it takes any load.

7. Double sheet bend

For wet, slippery or very different ropes. Tie an ordinary sheet bend, but take the thinner rope twice round the bight before tucking it under itself.

8. Anchor bend

Also called the fisherman's bend. It ties the line to the anchor and holds when the line jerks and twists in a swell.

How to tie it:

  1. Pass the line twice through the anchor's ring or shackle.
  2. Take the end round the standing part and tuck it through both turns.
  3. Finish with a half hitch round the standing part.

Many boats have chain between the anchor and the rope, so check yours before you anchor.

9. Reef knot

The reef knot lies flat and is good for tying round a lowered sail, a bag or a coiled line. It is not safe for joining two ropes under load, because it can capsize and slip apart. Use a sheet bend.

How to tie it: right over left and under, then left over right and under. Both ends should come out on the same side.

Practise before you go

Take a metre of rope and a chair back. Tie each knot five times looking, then a few times without. The bowline and the cleat hitch are the two to know in your sleep, because you need them when the boat is drifting and someone on the pontoon is waiting for the line.

How to moor

Alongside

The most common way in guest harbours and along quays in Norway and Sweden.

  • Put the fenders out before you come in, on the side that will lie against the pontoon, at the right height.
  • Approach slowly at a shallow angle and stop parallel to the pontoon.
  • Make the bow and stern lines fast first, then add a spring, a line running diagonally from midships along the pontoon, so the boat can't surge back and forth.

Stern-to with a lazy line

In Croatia, Greece, Spain and most of the Mediterranean, charter yachts moor stern-to the quay. In many marinas a lazy line, a thin line tied to a heavy mooring on the seabed, runs from the quay.

  • Reverse in slowly with fenders out on both sides.
  • Pass the stern lines ashore and make them fast on the stern cleats with a cleat hitch.
  • Pick up the lazy line, walk it forward and make the heavier mooring line it leads to fast on a bow cleat. Pull it tight so the stern stays off the quay.

Where there is no lazy line, you drop your own anchor on the way in. Read our posidonia guide before anchoring in the Balearics, and the rules and fees for charter crews in Croatia before you sail there.

When you rent a boat

  • Where are the mooring lines, fenders and anchor kept?
  • Is the bitter end of the anchor line tied to the boat?
  • Which cleats should you use for mooring?
  • What does the forecast say about wind strength and direction tonight?

Our guide to renting a boat for the first time goes through the whole handover.

Frequently asked questions

Which knot is best for mooring?

On the boat's cleats, use a cleat hitch. To a ring or post, a round turn and two half hitches is the most secure, and a bowline gives you a fixed loop to drop over a bollard.

Can I use a reef knot to join two ropes?

Not when the ropes will take a load. A reef knot can slip apart. Use a sheet bend, or a double sheet bend if the ropes are slippery.

Why is boat speed measured in knots?

A knot is one nautical mile per hour, or 1.852 km/h. The name comes from sailors once measuring speed by counting knots on a line running out behind the ship.

Do I need to know knots to rent a boat?

You should. Lines and fenders are usually ready on board, but you are the one who ties the boat up.

Find a boat to practise on: a sailing boat if you want to work with sheets too, a day boat in Oslo, or a charter yacht from Split.

Rent boats

Find the right boat to rent on Ship O'Hoi

Explore our selection of rental boats and find the perfect match for your next day on the water.

Browse boats for rent

Recommended reading

First Time Renting a Boat: Complete Step-by-Step (From Booking to Return)

First Time Renting a Boat: Complete Step-by-Step (From Booking to Return)

A complete guide for first-time boat renters. From booking and handover to return — everything you need to know.

Read
10 Common Mistakes First-Time Boat Renters Make (And How to Avoid Them)

10 Common Mistakes First-Time Boat Renters Make (And How to Avoid Them)

Avoid the most common blunders when renting a boat for the first time. From weather checks to fuel — here are the 10 mistakes you do not want to make.

Read
What Are Sea Marks?

What Are Sea Marks?

Out on the water, it’s not only charts and GPS that guide you. Along the coast, you’ll find sea marks designed to help you avoid reefs, shallows, and other hazards. But what exactly are sea marks, and how do you learn to use them?

Read
Right of Way at Sea: Key Rules Explained With Simple Scenarios

Right of Way at Sea: Key Rules Explained With Simple Scenarios

Right of way at sea explained simply – sail vs motor, crossing situations, overtaking, and narrow channels. Everything you need for safe navigation.

Read